Starting Saturday, October 10th, System 6 product orders will be on hold through October 26th. Orders placed during that time will be shipped on October 27th. Thank you for your understanding!
System 6™ is a two part urethane coating that can be applied to PVC boats. The PVC kit includes Accelerator. Primer is not required for PVC. It is both abrasion resistant and flexible when fully cured. It dries to the touch overnight and the special accelerator in each kit creates a full cure in 4 days (10 days if used without the accelerator, accelerator INCLUDED).
System 6™ is easy to mix because you combine equal parts of Part A and Part B. However, if you are going to add pigment you must add the pigment to Part A first and then combine with Part B. To match the color of your boat stir in our special System 6™ Stay True Color™ Stable Pigment. (SOLD SEPARATELY)
The kits listed are to be applied with a brush or a short nap roller. Coverage estimates are for 30-40 mil thickness (0.03″-0.04″) – thinner applications will cover more.
1 Pint Kit covers about 3 sq. ft.
1 Quart Kit covers about 6 sq. ft.
1/2 Gallon Kit covers about 12 sq. ft.
1 Gallon Kit covers about 24 sq. ft.
2 Gallon Kit covers about 48 sq. ft.
PLEASE PAY SPECIAL ATTENTION to when the pigment gets added to part A of the System 6™.
THIS PRODUCT ABSOLUTELY CANNOT SHIP OUTSIDE THE LOWER 48 STATES
***Please note…..System 6 will only ship on Tuesdays and Friday’s of each week.***