A7 Recessed Rubber Molding For A7 Valve by Leafield

$21.50

The Molding used for the A7 Valve by Leafield was primarily in the 1980’s Avon rafts & inflatable boats.

10 in stock (can be backordered)

Description

The black extruded rubber Molding for the A7 Valve by Leafield was primarily used in the early ’80’s in river boats (especially Avon Riverboats). The use of this molding allowed for mounting the A7 valve in a recessed fashion so it wouldn’t protrude out from the surface of the riverboat and create a safety hazard. The A7 Valve was typically installed in dinghy’s, RIB’s and other inflatables directly to the inflatable boat’s material using the A7 Pressure Ring (call us if you need one of these) without this molding. This molding is installed into the rubber raft with Hypalon adhesive. Man of Rubber River Gear is proud to be Leafield’s distributor for the Americas.

Additional information

Weight 0.75 lbs
Dimensions 4 × 3 × 3 in

Reviews

There are no reviews yet.

Be the first to review “A7 Recessed Rubber Molding For A7 Valve by Leafield”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…