A7 Recessed Rubber Molding For A7 Valve by Leafield

Description

The black extruded rubber Molding for the A7 Valve by Leafield was primarily used in the early ’80’s in river boats (especially Avon Riverboats). The use of this molding allowed for mounting the A7 valve in a recessed fashion so it wouldn’t protrude out from the surface of the riverboat and create a safety hazard. The A7 Valve was typically installed in dinghy’s, RIB’s and other inflatables directly to the inflatable boat’s material using the A7 Pressure Ring (call us if you need one of these) without this molding. This molding is installed into the rubber raft with Hypalon adhesive. Man of Rubber River Gear is proud to be Leafield’s distributor for the Americas.